Siglite(360 degree tempered glass road marking reflector
SIG-25, white
SIG-25, yellow
Product ID: SIG-25
‧Enhance the reflection of road marking lines during the raining night since the tiny glass beads in the thermoplastic are non-reflective in the rainy water.
‧Guiding traffic in the freeways or winding curves at night in addition to the road marking lines, and providing safer visual environment. The tiny glass beads in the thermoplastic fall off easily; thus the reflection of road marking lines declines extensively. The bumping action will alert motorists when they change lanes.
Please refer to the videos as below:
DOWNLOAD SPEC HERE!
Specifications:
- Model: Sig-W (white), Sig-Y (yellow)
- Height of protruding part: 25mm
- Diameter: 100mm
- Material: Tempered glass
- Best compressive strength
- 40 tons above
- Highest impact strength
- According to the CNS13762, the test standard of Taiwan, dropping 1.04 kg of steel ball from height of 1.5 m and there is no crack at all on the product.
- Certificates
- CNS13762 (Taiwan) at 1997
- DIN EN1463-1 (Europe) at 2004
- JT/T 390-1999 (China) at 2005
- ISO 9001 at 2006
- DIN EN 1463-2 (Europe) at 2006
- CE certificate (Europe) at 2008
- Color available
- White, Yellow
- Weight: 540±20 g
- Packing: 13.5kgs/carton, 24pcs/carton, 80 cartons/pallet,
Features:
- No blind spot in any curve. Performance out beats any flat type reflector.
- High degree of surface hardness and scratch-proof surface; the reflection can last extremely long
- This is at average of 40-50 tons according to inspection of CNS 13762; if the market requires, product with compressive strength of greater than 60 tons can be provided.
- High strength and long durability.
- The protruding part is 100% reflective.
- Smooth surface and not easy to accumulate dust, which needs no cleaning and maintenance.
- Fully automatic production with machinery.
- The lifetime is 15 times longer than traditional plastic pavement marker.
- Construction Method for Tiger Eye:
- 1. Provide well safety warning facilities.
- 2. Use the drilling machine to make a hole with diameter of 100mm and depth of 25mm (mark on the drilling machine or add a ring slot on the drilling bit to ensure certain depth of the hole drilled).
- 3. Use the bush tool to remove asphalt from middle of the hole (in case of cement road surface, use jack hammer to crush the cement)
- 4. Blow away the sandy soil and water in the hole with high pressure air (or absorb water with sponge).
- 5. Use mold with fixed height to test if the depth of hole is suitable or not (otherwise modification must be made).
- 6. Place asphalt glue or epoxy resin into the hole (The asphalt glue is fast hardening and fast to work with; it influences traffic less with low cost, which is suitable for highway, large traffic flow or large amount of continuous installation. For loose works with less quantity, epoxy resin is used).
- 7. Place Tiger Eye into the hole and rotate for about 30°; finally, lightly knock the top of Tiger Eye with rubber hammer for smoothness and complete fixture.
Order Information:
- Minimum Order: Negotiable
- Branded Product
Contact Detail
| CEO: | Mr. C.S. Chen |
| Contact: | Mr. Chang , Wei - Chih (Anthony Chang) |
| Address: | No. 68, Kuang Fu N. Rd., Hsin Chu Industrial Park Hsin Chu, 303 Taiwan, R.O.C. |
| TEL: | 886-3-5984567 |
| FAX: | 886-3-5977899 |
| Email: | seih.ying@msa.hinet.net |
| URL: | http://www.siglite.com http://www.siglite.com.tw http://www.seih-ying.com.tw http://www.siglite.asia http://www.tigereye.asia |
| ZIP: | 303 |